high bandwidth connectors for new technologies 用于新技术的高带宽连接器
high bandwidth connectors for new technologies
用于新技术的高带宽连接器
the world is fast and dynamic, as are today’s devices. there is a constant quest to develop modern applications which exceed the speed limits of their predecessors. nowhere is speed more of a design concern than for connectors. connectors are getting smaller and denser while handling faster speeds. smart applications and intelligent environments abound with high bandwidth connectors. from 56g to 112g to 224g, the connector industry strives to meet the challenges put forth by new technologies every day. among the many challenges we are facing, one of the most prominent is that of maintaining a 224gb/s performance with manufacturing tolerances not only limited to the connector, but throughout the pcb and the whole system. the tolerances for the connectors and breakout regions are limited b
世界和今天的设备一样,都是快速和动态的。人们不断寻求开发现代速度极限的应用。速度比连接器更符合设计问题。连接器变得越来越小,同时处理更快的速度。智能应用程序和智能环境中充满了高带宽的连接器。从56克到112克到224克,连接器行业每天都在努力应对新技术带来的挑战。在我们面临的众多挑战中,最突出的一个是保持224gb/s的性能,制造公差不仅局限于连接器,而且贯穿整个pcb和整个系统。连接器和断裂区域的公差是有限的b
in order to analyze how the connector will interface with its board stack and pad stack, and to have an idea of its performance, designers always prefer good mechanical models of connectors to bring into the simulation. 14 ghz or 28 gb/s should be defined as the cutoff point for any connector model. above that bandwidth/data rate, it is critical to model the connector and the pcb together. a connector with crosstalk resonance cannot be modeled correctly unless the pcb is included in the model at the same time. to protect the intellectual property of their design, connector manufacturers often provide encrypted mechanical models of their products for integration into the simulation. however, their accuracy is quite often questioned. rowlands notes that it is standard for amphenol to pr
为了分析连接器将如何与它的板堆栈和垫堆栈接口,并了解其性能,设计师总是更喜欢把好的连接器的机械模型带到模拟中。14ghz或28gb/s应被定义为任何连接器型号的截止点。在带宽/数据速率以上,将连接器和pcb一起建模是至关重要的。除非模型中同时包含pcb,否则具有串扰共振的连接器不能正确建模。为了保护其设计的知识产权,连接器制造商经常提供其产品的加密机械模型,以便集成到仿真中。然而,它们的准确性经常受到质疑。罗兰兹指出,这是安苯酚到pr的标准标准
地址 : 深圳市坪山区坑梓街道沙田社区坪山大道6352号厂房二404